Certified Welding Inspectors are ready to assist in your weld consultation. No matter where you are in your process, our professionals are here to assist you in your process for developing a welding program or process that will meet the applicable welding code. We can travel to your location and sign off on Welding Specification Procedure (WPS), watch welders, sign off on Procedure Qualification Record (PQR), as well as inspect any welds you have already made. Call us today with any questions you may have.
Certified Welding Inspectors are ready to assist in your weld consultation. No matter where you are in your process, our professionals are here to assist you in your process for developing a welding program or process that will meet the applicable welding code. We can travel to your location and sign off on Welding Specification Procedure (WPS), watch welders, sign off on Procedure Qualification Record (PQR), as well as inspect any welds you have already made. Call us today with any questions you may have.
Phone: 303-780-9800
Chemical Analysis of Metals
ARL 3460 Optical Emission Spectrometer
Chemical analysis of metal alloys performed using an ARL 3460 vacuum Optical Emission Spectrometer (OES). This system is capable of testing several base alloys and is equip with 36 elemental channels.
Metal powders, chips, wire and sub-size samples are analyzed by preparing them with our remelt button furnace. This procedure enables us to analyze non-standard size samples spectrographically.
-
Carbon Steel Alloys
-
Stainless Steel Alloys
-
Tool Steel Alloys
-
Aluminum Alloys
-
Cast Iron Alloys
-
Copper Alloys
-
Nickel Alloys and Super Alloys
-
Titanium Alloys
Positive Material Identification of Metals
Chemical analysis of metal alloys performed using an Oxford MET8000 Expert will give you fast results on any metal alloy. This state of the art instrument is capable of analyzing samples quickly and identifying them to their closest match. This analyzer is going to give you fast results without compromising the tested surface.
This system is capable of testing several base alloys.
-
Stainless Steel Alloys
-
Tool Steel Alloys
-
Aluminum Alloys
-
Copper Alloys
-
Nickel Alloys and Super Alloys
-
Titanium Alloys
-
Magnesium Alloys
-
Lead/Tin/Silver solders
-
Zinc Alloys
The MET8000 can measure directly on Metal powders, chips, wire and sub-size samples that often times need additional preparation with other techniques .
-
Carbon & Sulfur by LECO Combustion technique.
-
In accordance with ASTM E1019 standards.
-
Oxygen & Nitrogen by LECO Combustion technique.
-
In accordance with ASTM E1019 standards.